Swaging Capabilities
Allied offers four regional centers for tube swaging. Below is each regional center, along with its capabilities:
Harvey
Mill 7 In-Line Swaging Capabilities:
- Swage Equipment: Double head swager- Swages two pieces at a time
- Gauge Range: 14-20
- O.D. Capabilities: 1.315, 1.660, 1.900
Philadelphia
Finn-Power Swager (Off-Line Swaging):
- Gauge Range: 13-19
- O.D. Capabilities: 1.029, 1.315, 1.660, 1.900, 2.197
On-Line Swage:
- Gauge Range: 14-16
- O.D. Capabilities: 1.315, 1.660
Phoenix
Off-Line Swage:
- Gauge Range: 14-19
- O.D. Capabilities: 1.315, 1.660, 1.900 (16-19 ga. only)
On-Line Swage:
- Gauge Range: 14-19
- O.D. Capabilities: 1.315, 1.660, 1.900 (16-19 ga. only)
Kokomo/Valparaiso
Draw Swager:
- Round O.D. Range: 0.750" - 2.375"
- Square/Rectangle O.D. Range: 0.625" - 4.000"
- Gauge Range: 11 - 20 gauge
- Tube Length Range: 12" - 294"
- Length of Swage: 1" - 7"
- Std Length Tolerance: +/- 1/8"
Large Segment Swager:
- Round O.D. Range: 1.500" - 5.000"
- Square/Rectangle O.D. Range: 0.625" - 1.500"
- Gauge Range: 10 - 20*
- Tube Length Range: 18" - 288"
- Length of Swage: 1" - 8"
- Std Length Tolerance: +/- 1/8"
* Wall thicknesses heavier than 12 gauge (.109" nominal) may require a second pass to produce a swage longer than 4 inches.
Combination Ram/Segment Swager:
- O.D. Range: 0.706" - 2.875"
- Gauge Range:
¾14 - 20 in segment mode
¾16 - 20 in ram mode
- Tube Length Range:
¾12" - 300" in segment mode
¾18"- 60" in ram mode
- Length of Swage: 1" - 3" in either segment or ram mode
- Std Length Tolerance: +/- 1/8" in both segment and ram mode
|
